View/Change Diagram

944 1985-88 - Body	944 1989-91 - Body
968 1992-95 - Body

View/Change Diagram

944 1989-91 - Engine

These brackets have been specially designed to allow you to install both, factory seat belts and aftermarket harnesses at the same time. Intended for the use of quick disconnect lap belts on both sides of the seat. This is a perfect set up for your street/track car. All brackets are designed to attach to the factory seat belt mounting locations so no drilling is required.
Note: product is sold individually.

General Fitment

Material: 1.5" x 1" x .125" wall carbon steel tubing
Finish: powdercoated in durable black wrinkle-finish.
Weight: 3 lbs.
Installation: attaches to 846r-907x series side mounts.
Miscellaneous: this mount works with the 846r-907x series side mount brackets in conjunction with factory non power 996/Boxster sliders and with the optional 846r-2030 fire extinguisher mount. A one-piece seat with anti-sub strap pass-through is required to use this product.

Fits: GT3 r/rs (99-03), GT3-cup (98-04), GT3 04-05 (04-05), GT3 99-01 (99-01), GT2 (01-05), turbo (01-05), c4s 3.6 (02-05), c4 3.6 (02-05), c2 3.6 (02-05), c4 3.4 (99-01), c2 3.4 (98-01), 3.2 03 - (03-04), 3.2 -02 (00-02), 2.7 03- (03-04), 2.7 -02 (00-0...(choose a part on the right to read more)

General Fitment

Race seat mounting option for 996/997/986/987

This product offers a simple installation process and adjustment flexibility.

This assembly mounts to the floor and places your seat in the lowest possible position. The integrated sub-bar is adjustable for proper 5 or 6-point sub-strap routings. This design also incorporates three front-to-rear fixed mounting points for the seat brackets (brackets not included - see 846r907xseries brackets). This entire assembly, including race seat, can be easily installed and removed as a single unit for race events.

Fits: GT3 rsr, 3.8l, 342kw (07-10), GT3 cup 3.8l (10-), GT3 cup s (08-09), GT3 cup 3.6l (05-07), GT3 rs, 331kw (10-), GT3, 320kw (10-), 3.6l, 305kw (07-09),...(choose a part on the right to read more)

General Fitment

Material: 1.5" x 1" x .125" wall carbon steel tubing
Finish: powdercoated in durable black wrinkle-finish.
Weight: 3 lbs.
Installation: attaches to 846r-907x series side mounts.
Miscellaneous: this mount works with the 846r-907x series side mount brackets in conjunction with factory non power 996/Boxster sliders and with the optional 846r-2030 fire extinguisher mount. A one-piece seat with anti-sub strap pass-through is required to use this product.

Fits: Carrera 4s, 3.8l, 261kw (05-08), Carrera 4, 3.6l, 239kw (05-08), Carrera s, Carrera, GT3 r/rs (99-03), GT3-cup (98-04), GT3 04-05 (04-05), GT3 99-01 (99-01), GT2 (01-05), turbo (01-05), c4s 3.6 (02-05), c4 3.6 (02-05), c2 3.6 (02-05), c4 3.4 (99-0...(choose a part on the right to read more)

General Fitment

Material: 1.5" x 1" x .125" wall carbon steel tubing
Finish: powdercoated in durable black wrinkle-finish.
Weight: 3 lbs.
Models: fits 996/997, Cayman, and Boxster.
Installation: attaches to r-9060, r-9063 side mounts.
Miscellaneous: this mount works with the r-9060, r-9063 side mount brackets in conjunction with aftermarket sliders and with the optional r-2030 fire extinguisher mount. A one-piece seat with anti-sub strap pass-through is required to use this product.

Fits: GT3 rsr, 3.8l, 342kw (07-10), GT3 cup 3.8l (10-), GT3 cup s (08-09), GT3 cup 3.6l (05-07), GT3 rs, 331kw (10-), GT3, 320kw (10-), 3.6l, 305kw (07-09), turbo s, 390kw (11-), turbo, 368kw (10-), GT2 (08-09), turbo (07-09), carre...(choose a part on the right to read more)

General Fitment

These brackets have been specially designed to allow you to install both, factory seat belts and aftermarket harnesses at the same time. Intended for the use of quick disconnect lap belts on both sides of the seat. This is a perfect set up for your street/track car. All brackets are designed to attach to the factory seat belt mounting locations so no drilling is required.
Note: product is sold individually.

General Fitment

Safety devices 6 point competition bolt-in  roll cage kit offered by stable energies includes: bolt on door bars, harness bar and diagonal. Optionally, the diagonal is offered in a non-removable version. Please refer to the part number to specify correctly when ordering. The bolt on harness bar is offset towards the rear to allow full movement of the front seats. This harness bar also incorporates shoulder harness guides which locate the shoulder harnesses on the harness bar. For the club racers, a seat back brace can be attached to the harness bar as well.
The most obvious advantages with safety devices is the tight fitment to the interior and proper mounting points. The mounting points are typically to the ...(choose a part on the right to read more)

General Fitment

Safety devices 6 point competition bolt-in  roll cage kit offered by stable energies includes: bolt on door bars, harness bar and diagonal. Optionally, the diagonal is offered in a non-removable version. Please refer to the part number to specify correctly when ordering. The bolt on harness bar is offset towards the rear to allow full movement of the front seats. This harness bar also incorporates shoulder harness guides which locate the shoulder harnesses on the harness bar. For the club racers, a seat back brace can be attached to the harness bar as well.
The most obvious advantages with safety devices is the tight fitment to the interior and proper mounting points. The mounting points are typically to the ...(choose a part on the right to read more)

General Fitment

Safety devices 6 point competition bolt-in  roll cage kit offered by stable energies includes: bolt on door bars, harness bar and diagonal. Optionally, the diagonal is offered in a non-removable version. Please refer to the part number to specify correctly when ordering. The bolt on harness bar is offset towards the rear to allow full movement of the front seats. This harness bar also incorporates shoulder harness guides which locate the shoulder harnesses on the harness bar. For the club racers, a seat back brace can be attached to the harness bar as well.
The most obvious advantages with safety devices is the tight fitment to the interior and proper mounting points. The mounting points are typically to the ...(choose a part on the right to read more)

General Fitment

These brackets have been specially designed to allow you to install both, factory seat belts and aftermarket harnesses at the same time. Intended for the use of quick disconnect lap belts on both sides of the seat. This is a perfect set up for your street/track car. All brackets are designed to attach to the factory seat belt mounting locations so no drilling is required.
Note: product is sold individually.

General Fitment

This is a high-quality replacement for original number, 911 211 021 14 manufactured by dansk. It is manufactured in stainless steel and includes the necessary brackets and tabs for a direct bolt on replacement. Dansk offers a complete line of replacement parts to complement the entire Porsche model range. All dansk products are manufactured to the highest of European standards to ensure the quality and performance you expect for your Porsche. This commitment has made dansk one of the original equipment suppliers to the Porsche in Germany. For a proper installation, we recommend heat exchanger installation kit, part # FVDmk911101 sold individually. 1 necessary per car. Please note: the corresponding right side i...(choose a part on the right to read more)

Exact reproduction of the original no longer available factory bracket for all 70-74 914 1.7 and 1.8 heat exchangers this is a must to support the heat exchangers and muffler and to keep the system from pulling out the exhaust studs

View/Change Diagram

914 1970-76 - Fuel/Exhaust

This is a high-quality replacement for original number, 911 211 022 10 manufactured by dansk. It is manufactured in stainless steel and includes the necessary brackets and tabs for a direct bolt on replacement. Dansk offers a complete line of replacement parts to complement the entire Porsche model range. All dansk products are manufactured to the highest of European standards to ensure the quality and performance you expect for your Porsche. This commitment has made dansk one of the original equipment suppliers to the Porsche in Germany. For a proper installation, we recommend heat exchanger installation kit, part # FVDmk911100 sold individually. 1 necessary per car.

This item may need to be sourced from ge...(choose a part on the right to read more)

This is a high-quality replacement for original number, 911 211 021 60 manufactured by dansk. It is manufactured in stainless steel and includes the necessary brackets and tabs for a direct bolt on replacement. Dansk offers a complete line of replacement parts to complement the entire Porsche model range. All dansk products are manufactured to the highest of European standards to ensure the quality and performance you expect for your Porsche. This commitment has made dansk one of the original equipment suppliers to the Porsche in Germany. For a proper installation, we recommend heat exchanger installation kit, part # FVDmk911100 sold individually. 1 necessary per car. Please note: the corresponding right side i...(choose a part on the right to read more)

German made quality reproduction of the original rsr front strut brace. The provided strut tower brackets must be drilled to accept the cross bar and welded into position. Sold individually. 1 necessary per car.

This item may need to be sourced from Germany and would take 2-4 weeks to arrive. Once ordered it cannot be canceled. Please call to check stock or request expedited shipping.

Steel, prime coated jack receiver reinforcing bracket, made by dansk. They offer a complete line of replacement bodywork to complement the entire Porsche model range. All dansk products are manufactured to European standards to ensure the quality that you expect for your Porsche. This commitment has made dansk one of the original equipment suppliers to the Porsche in Germany. Sold individually. 1 necessary per car. Please note: due to variances in production at the factory, age, accident damage or rust, each part may require trimming and or adjustment for perfect fitment.

This item may need to be sourced from Germany and would take 2-4 weeks to arrive. Once ordered it cannot be canceled. Please call to check...(choose a part on the right to read more)

Sport rear silencers for Porsche Cayenne 955 v6. These sport rear silencers are concipated as absorptive silencers which reduce exhaust back pressure drastically. The result is besides more power and a better response characteristic, a sporty deep hollow sound. Further more the rear silencers are considerably lighter than thestandard product.

Strenghtened brackets as well as the olive- and slide system ensure anexact adjustment, which guarantees a stressless installation. Also the tailpipes can be positionned precisely.


Features:

Stainless steel sport rear silencers

General Fitment

German made quality reproduction of the original rsr front strut brace. The provided strut tower brackets must be drilled to accept the cross bar and welded into position. Sold individually. 1 necessary per car.

This item may need to be sourced from Germany and would take 2-4 weeks to arrive. Once ordered it cannot be canceled. Please call to check stock or request expedited shipping.

Sport rear silencers set for Porsche Cayenne 958 s hybrid.

Cargraphic sport rear silencers are concipated as absorptive silencers which reduce exhaust back pressure drastically. The result is besides more power and torque a better response characteristic. Further evidence of improvements made, are recognised through an enhancedaccoustic and weight reduction.

Strenghtened brackets as well as the olive- and slide system ensure anexact adjustment, which guarantees a stressless installation.


Features:

Performance: 7kw (10ps) more power and 10nm additional torque

General Fitment

This is the pillar that buts up to the a-pillar to secure the hinges. It is prime coated and includes the angular bracket. This hinge pillar is made by dansk, they offer a complete line of replacement bodywork to complement the entire Porsche model range. All dansk products are manufactured to European standards to ensure the quality that you expect for your Porsche. This commitment has made dansk one of the original equipment suppliers to the Porsche in Germany. Sold individually. 1 necessary per car. Please note: due to variances in production at the factory, age, accident damage or rust, each part may require trimming and or adjustment for perfect fitment.

This item may need to be sourced from Germany and...(choose a part on the right to read more)

This is the pillar that buts up to the a-pillar to secure the hinges. It is prime coated and includes the angular bracket. This hinge pillar is made by dansk, they offer a complete line of replacement bodywork to complement the entire Porsche model range. All dansk products are manufactured to European standards to ensure the quality that you expect for your Porsche. This commitment has made dansk one of the original equipment suppliers to the Porsche in Germany. Sold individually. 1 necessary per car. Please note: due to variances in production at the factory, age, accident damage or rust, each part may require trimming and or adjustment for perfect fitment.

This item may need to be sourced from Germany and...(choose a part on the right to read more)

Automobile atlanta is proud to announce the production of the long discontinued 1.7/2.0 control unit securing brackets. As you know the control units for 914s were all mounted on the front of the battery tray, and in fact the '75-76 model brackets were welded to it! Prone to rustout, this direly needed part was nearly impossible to find even among our over 200 914 parts cars!

Now we are no longer worried about supply. A perfect factory duplicate, simply power paint semi gloss black or for '75-76 the cars color, and have a new bracket that not even the concours judges could tell from the factory original!

View/Change Diagram

914 1970-76 - Electrical

Techart coilover suspension kit Porsche 996 turbo 01-05

The worldest largest aftermarket Porsche tuner, techart, has these coilovers for the Porsche 996 turbo coupe and cabrio.

Improves handling and response and has adjustable ride height.

Features:
-sport springs front/rear
-4 adjustable shock absorbers
-new links and brackets for standard sway bars
-lowers ride height up to 30mm
-t_v-approval

Vivid racing is an authorized techart distributor and can handle all of your Porsche needs.

Note: picture is for representation only. Actual product may vary.


*contact us for special pricing.*

General Fitment